All Australian Stock and Warranty - Free Standard postage Australia Wide included in the Price
If you need it urgently, please consider using an EXPRESS Post option.
Black Housing for GoPro HERO3+/ GoPro HERO4 | Waterproof down to 40 Metres
This after-market Black housing helps to keep a low profile due to the matte black finish. You can film without drawing attention to the camera - Stealth Mode!!!
Note: The waterproof back door is black and will not allow viewing of the LCD screen in the GoPro HERO4 Silver Edition camera. You will also not be able to see the RED record LED Lights on the camera.
This housing is also suitable for the GoPro HERO3 camera but the following information should be noted BEFORE purchasing:
The original GoPro HERO3 housing was rated to 60 Metres underwater. With the release of the GoPro HERO3+ camera and later the GoPro HERO4, the old GoPro HERO3 housing was RENAMED the "DIVE" housing and the new HERO3+/HERO4 housings were called the "Standard" Housings. The Standard Housings are only rated to go down to 40 Metres, however, this is only a problem to advanced Scuba divers, as the majority of recreational divers rarely go down that deep.
The 3 cameras (GoPro HERO3/HERO3+/HERO4) are all the same size and will fit into the standard housing.
Perfect for all water-based activities, including snorkelling and Scuba Diving down to a maximum depth of 40 Metres.
The housing fits all filters intended for the Standard housings including the Polar Pro RED filter, Magenta filter, snorkel filter, Neutral density filter, Polariser filter and Macro Lens (sold separately in our store).
1x Waterproof Housing (Black)
1x Waterproof Back Door (Black)
1x Quick connect buckle
Note: The housing does NOT come with stickers for the front LCD screen or a skeleton backdoor.
This is an aftermarket product, but for all intents and purposes, it will operate exactly the same as a GoPro branded item.
This accessory is compatible with the following GoPro Camera Models:
IMPORTANT: As this is a "Replacement" Housing, we assume that you will already be familiar with the issue of "Fogging" with GoPro Housings. Just in case you are not, then please be aware of the following information. As with all cameras that are used INSIDE a housing, "Fogging" in the lens area can occur due to Humid air trapped INSIDE the housing condensing when the housing is cooled from the outside (for example when snorkelling or Scuba Diving). This is a well-known problem that often occurs in Humid and tropical environments. You can Google ways to deal with this issue to avoid spoiling your footage. One solution is to use Anti-Fog inserts inside the housing.
We also sell Anti-Fog inserts in our store.
12 months Australian Warranty
Be The First To Review This Product!
Help other Hero Gear users shop smarter by writing reviews for products you have purchased.