FeiyuTech WG2 Waterproof (IP67) 3-Axis Gimbal for GoPro HERO3/3+/4/5/6/HERO/Session

In Stock

Calculate Shipping

HERO GEAR specialises in GoPro HERO Camera related accessories

All Australian Stock and Warranty - Free STANDARD postage Australia Wide is included in the Price.

Important: As per Dangerous Goods Regulations (DGR), all Lithium batteries or Products containing Lithium batteries are classified as Dangerous Goods. Lithium Batteries may NOT be carried in the mail by air. That means that Express Post and International Post are not available for this item. We can only ship them via Australia Post using Road Transport.

FeiyuTech WG2 Waterproof (IP67) Wearable Gimbal for GoPro HERO3 / HERO3+ / HERO4 / HERO5 Black / HERO6 / Session Cameras / HERO 2018

The Feiyu Tech WG2 is a wearable waterproof (IP67) 3-axis gimbal that's compatible with GoPro HERO 3 GoPro HERO3+, GoPro HERO4, GoPro HERO5 Black, GoPro HERO6 and GoPro HERO 2018. It can also be used with GoPro HERO4 Session and GoPro HERO5 Session cameras by using the SESSION Mounting plate. On top of that, you can even use the WG2 with other similar sized Action cameras such as SJCAM and YI 4K. The gimbal can be worn (chest mount, helmet, etc). The gimbal can also be mounted (vehicles, bikes, etc) or handheld (Poles, Handgrips, Tripods etc).


  • IP67 Waterproof: The WG2’s improved design combined with waterproof technology now enables it to be used underwater to around 0.5M for snorkeling, surfing, on rainy days etc. WARNING: NOT suitable for Scuba Diving
  • Two-axis 360 Degree Move without Limitation: Unlike other gimbals, the WG2 has a full 360-degree movement for Pan and Tilt rotations. Roll movement (side to side) is up to 70 Degrees with soft pad protection to avoid camera damage from the Panning motor.
  • Knob with Sliding Arm: The WG2 has a knob with a sliding arm to help make it compatible with several action camera models. It allows you to easily balance different cameras.
  • Time-lapse Photography: Record some amazing Time-Lapse sequences using the auto-rotation function.
  • Optimizing Anti-shake: Make your shots more stable.
  • Download the Feiyu app for IOS and Android



  • One button operation
  • Unlimited 360 Degree Pan and Tilt Rotation.
  • Noise from the motor can be minimised by setting GoPro HERO5/6 to “Wind Only”.
  • A Soft protection pad on the panning motor protects the camera from damage.
  • A Fixed block is a standard accessory to lock the arm when the gimbal is turned off.
  • Anti-slip design on the bottom and side for better grip
  • Power on and off with an audible BEEP.
  • Automatically enters standby mode if turning on without a camera installed to protect the motor
  • Intelligent initialization automatically checks motionless desk and finishes with an audible beep
  • Intelligently follows a pre-set route in auto-rotation mode, fit for motion time-lapse or automatic shooting
  • Use the Feiyu APP to upgrade firmware, change settings and remotely control with Gimbal
  • Compatible with extension bar and tripod with 1/4 inch thread hole at the bottom and side.


  • Compatibility: WG2 is compatible with GoPro HERO6/GoPro HERO5 Black/GoPro HERO4/GoPro HERO3+/GoPro HERO3 without bacpacs.
  • Also works with LCD/YI 4K / SJCAM/AEE and other similar sized action cameras.
  • It is also compatible with GoPro HERO Session series by using the session mounting plate.
  • Payload: Maximum payload is 130g;
  • Panning: 360°;
  • Tilting: 360°;
  • Rolling: 70° (The rolling angle cannot be changed ) ;
  • Tilting Increments: 1.5°/s ~ 150°/s ;
  • Panning Increments: 1.5°/s ~ 270°/s ;
  • Battery: Built-in lithium battery,1500mAh,3.7V. Charging via USB port is supported.
  • Charging Time: ≥2 Hours; Note: Unit is not Waterproof while charging.
  • How to Balance It: You can move the sliding arm to find the perfect balance status for different cameras.
  • There is a special mark for Hero4/5 on the sliding arm, which makes it easier and quicker to achieve balance.
  • Extensible Port: 1/4inch thread hole at the bottom and the back side, M2mm thread hole next to 1/4inch thread hole for fixing the T-clamp;
  • Grade of Waterproof: The grade of waterproof is the same as iPhone 7 series. WG2 can work continually for 10 minutes under the water within 1 meter.
  • NOT recommended for use in seawater. BUT if you do, please wash in fresh water immediately;
  • Working Time: 2.5 Hours;
  • Net Weight: 265g (Not including camera);
Package Contents:
  • WG2 Gimbal*1;
  • USB Cable*1;
  • Session Mounting Plate*1;
  • Short Screw *2;
  • Long Screw *2;
  • Fixed Block*1(to keep the gimbal fixed while power off);
  • Portable Bag*1

Note: GoPro Cameras are NOT included. They are shown for demonstration purposes ONLY.



Barcode # 6970078070691
Brand FeiyuTech
Shipping Weight 0.8000kg
Shipping Width 0.265m
Shipping Height 0.380m
Shipping Length 0.100m

12 Months LOCAL Australian Warranty

Be The First To Review This Product!

Help other Hero Gear users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category