Express Post available for urgent orders.
ULANZI CA15 OneLock Tablet Clamp | with Cold Shoe & Arca-Swiss
Product Description
The ULANZI CA15 OneLock Tablet Clamp (Model: CA15) puts an iPad or tablet on a tripod, a light stand, or a desk mount and keeps it there.
The spring-tensioned jaws open from 13.5cm to 22cm, gripping the edge of the tablet between reinforced silicone pads, and a single push-to-lock switch locks it off tight.
Underneath is a 1/4"-20 thread, so it screws onto any quarter-inch tripod, mini tripod or light stand. An ARRI locating hole sits beside the 1/4" thread hole for ARRI-compatible devices. The base is also fashioned as an Arca-Swiss and Ulanzi Uka plate, which means it drops straight into a compatible quick-release clamp and comes out again in a second — useful if the tablet is moving between a desk stand and a tripod through the day.
On top sits a universal cold shoe for a light, a microphone or a small monitor, so a video call or a piece to camera can be lit and miked from the same mount. The whole thing is CNC-machined aluminium and weighs 145g.
Will It Fit? Measure the Clamped Edge:
| Device | Sideways (Landscape) | Upright (Portrait) |
| iPad Pro 13", iPad Pro 12.9" | 21.5cm — FITS | 28cm — TOO TALL |
| iPad Pro 11", iPad Air 11" | 17.8cm — FITS | 25cm — TOO TALL |
| iPad 10.9" | 17.9cm — FITS | 24.9cm — TOO TALL |
| iPad mini | 13.5cm — FITS, with little to spare | 19.5cm — FITS |
| Android and Windows tablets | Measure the edge that will sit in the clamp. Anything from 13.5cm to 22cm will hold | |
The clamp stands upright and grips the top and bottom edges, so a tablet mounts sideways — which is how you would want it for a video call, a piece to camera or sheet music anyway. Stood on its end in portrait, a full-size iPad measures 25cm to 28cm top to bottom, beyond the 22cm the jaws open to. The iPad mini is the only one small enough to go either way round.
Key Features:
- 13.5cm to 22cm Jaws: Holds an iPad mini through to a 13" iPad Pro, measured across the edge in the clamp.
- One Push to Lock: A single switch sets the width, with no thumbscrew to wind and nothing to tighten by feel.
- 1/4"-20 Thread with ARRI Locating Hole: Screws onto any quarter-inch tripod, mini tripod or light stand.
- Arca-Swiss and Uka Base: Drops into a compatible quick-release clamp and lifts out in a second.
- Cold Shoe on Top: Takes a light, a microphone or a small monitor on the same mount.
- 145g of CNC Aluminium: Machined aluminium alloy with reinforced silicone pads on both jaws.
Specifications:
- Clamping Range: 13.5cm to 22cm
- Base Mount: 1/4"-20 thread with a single ARRI locating hole
- Quick Release: Arca-Swiss and Ulanzi Uka compatible
- Accessory Mount: Universal cold shoe on top
- Locking: Push-to-lock switch, tool free
- Grip: Reinforced silicone pads on both jaws
- Material: CNC-machined aluminium alloy
- Dimensions: 15 x 3.5 x 3.5cm
- Weight: 145g
What's Included?
- 1 x ULANZI CA15 OneLock Tablet Clamp
What is Not Included? Tablets, tripods, lights and other accessories not listed may be shown in images for demonstration purposes ONLY and are NOT included.
Buy with Confidence: Hero Gear is an Authorised Reseller for all brands we stock in Australia. Standard Postage Australia-Wide is already included in the price of every item. Items are covered by a 12-month Australian Warranty and are shipped directly from our Hunter Valley, NSW, warehouse.
⚠️ Important Care & Warranty Exclusions
- Measure Before You Order: Screen sizes quoted in inches are diagonal measurements and do NOT tell you whether a tablet will fit. Measure the edge that will sit in the clamp. It must be between 13.5cm and 22cm.
- Full-Size Tablets Mount Sideways: Stood upright in portrait, an 11" or 13" iPad is 25cm to 28cm from end to end and will NOT fit between the jaws. Only the iPad mini is small enough to mount upright.
- Lock It Before You Let Go: Set the width, push the switch to lock, and check the tablet is held before you take your hands away.
- Mind the Cold Shoe Load: The cold shoe is sized for a compact light, microphone or monitor. A heavy accessory on top raises the centre of gravity and can tip the whole mount.
- Use at your own risk: Hero Gear is not responsible for loss or damage to tablets or equipment used in conjunction with this accessory.
- Warranty Coverage: Warranty covers manufacturing defects only. Damage resulting from use, misuse, accidents, falls, or any activity-related incident is NOT covered — regardless of the activity involved.
Need More Information?
For further details on how we get your order to you, or how we handle support, please visit our dedicated information pages:
- View our Shipping Policy
- View our Warranty Information
- View our Returns Policy
Have a specific question about this product? We are here to help! Please reach out to us via our Contact Us page.
Technical Compatibility and Specifications
Type: Mount: Tablet Clamp
Manufacturer SKU: CA15
Warranty
We are authorised Australian resellers, ensuring you receive genuine stock and local support. All products purchased from Hero Gear come with a standard 12-Month Australian Warranty.
