ULANZI LM06 Dual Magnetic Fill Lights for DJI Osmo Pocket3/4

The ULANZI LM06 Dual Magnetic Fill Lights (Model: LM06) put an LED panel on each side of your DJI Osmo Pocket3 or Pocket4, so your face is evenly lit from both sides instead of one. The whole set — two lights and the bracket that carries them — weighs 88g and folds flat enough for a jacket pocket or a handbag.

The bracket is the clever part, and it does three jobs. It is a form-fitting clip that pushes straight onto the camera body, lined with silicone to hold it steady, and it carries a round magnet on each side. The lights snap onto those magnets, and each one rotates a full 360°. Your Pocket's gimbal swivels 180° at the push of a button to switch between the scene ahead and a selfie — easily turn the lights by hand, and they face the same way as the camera, with nothing to unclip or remount. Clipped on, the bracket leaves the screen free to rotate and the battery grip free to come on and off.

Both panels run at 5800K with a CRI of 96 or better, so skin tones and colours come back looking the way they looked to you. Three brightness levels step through 20%, 50% and 100% on a single button; press and hold that same button to turn a light on or off.

Each light carries a 500mAh battery — around 4 hours at 20%, or 1 hour flat out at 100%. When they run down, the bracket becomes the charging dock. A USB-C socket on the bracket feeds both lights through pogo pins, one seated inside and one on the back, so the pair charges together from one cable in about 1.5 hours.

Key Features:

• Two Lights, Not One: A panel on each side fills both halves of your face at once, instead of lighting one side and leaving a hard shadow down the other.
• Clip-On Bracket, No Tools: A form-fitting clip pushes onto the camera body and grips on a silicone lining — nothing to screw, clamp or stick down.
• Face Them Forward or Back: Your Pocket's gimbal swivels 180° at a button press — turn the lights by hand to match it, with nothing to unclip. Fills a backlit subject in front of you, or lights your own face for a selfie.
• Nothing Gets in the Way: The screen still rotates, and the battery grip still comes on and off with the bracket fitted.
• 5800K Daylight at CRI 96+: Natural daylight colour with high colour accuracy, for skin tones in selfies and true colour in food and product shots.
• Three Brightness Levels on One Button: Step through 20%, 50% and 100% with a press; hold to turn the light on or off.
• The Bracket Is Also the Charging Dock: Both lights charge together through pogo pins from a single USB-C cable — no swapping, no second cable.
• 88g for the Whole Set: Two lights and the bracket together, folding flat to travel.

Camera Brand & Model Compatibility:

Specifications:

• Lights: 2
• Colour Temperature: 5800K (±200K)
• Colour Rendering: CRI 96 or better
• Brightness Levels: 3 — 20%, 50% and 100%
• Controls: Single button per light. Press to change brightness; press and hold to turn on or off
• Battery: 3.7V 500mAh per light
• Maximum Power Draw: 1.6W per light
• Runtime: Approximately 4 hours at 20%, 2.5 hours at 50%, 1 hour at 100%. Ulanzi rate the 20% figure at 4.3 hours — we quote 4 hours as a realistic allowance for battery age and temperature
• Charging Time: Approximately 1.5 hours
• Charging: USB-C socket on the charging bracket, charging both lights through pogo pins
• Rotation: 360° per light, including a 180° swivel from front-facing to rear-facing
• Charging Bracket: Form-fitting push-on clip with silicone lining, magnets on both sides and on the back
• Weight: 88g for the complete set
• Colour: Black

What's Included?

• 1 x ULANZI LM06 Dual Magnetic Fill Lights for DJI Osmo Pocket Cameras, comprising:
• 2 x Magnetic Fill Lights
• 1 x Charging Bracket
• 1 x USB Charging Cable

What is Not Included? Cameras, lights, microphones and other accessories not listed may be shown in images for demonstration purposes ONLY and are NOT included.

Buy with Confidence: Hero Gear is an Authorised Reseller for all brands we stock in Australia. Standard Postage Australia-Wide is already included in the price of every item. Items are covered by a 12-month Australian Warranty and are shipped directly from our Hunter Valley, NSW, warehouse.

Need More Information?

For further details on how we get your order to you, or how we handle support, please visit our dedicated information pages:

• View our Shipping Policy
• View our Warranty Information
• View our Returns Policy

Have a specific question about this product? We are here to help! Please reach out to us via our Contact Us page.

We are authorised Australian resellers, ensuring you receive genuine stock and local support. All products purchased from Hero Gear come with a standard 12-Month Australian Warranty.