Express Post available for urgent orders.
ULANZI PK15 Magnetic Holder Bracket for DJI Osmo Pocket3/4
Product Description
The ULANZI PK15 Magnetic Holder Bracket (Model: PK15) does one thing: it holds a DJI Osmo Pocket in a wrap-around frame and sticks it to steel. The camera sits inside the frame, a hinged door closes over it and latches shut, and a strip of silicone inside the back face keeps it safely cushioned.
The base of the frame is open, so the DJI battery grip can still attach underneath with the bracket fitted. That is worth knowing if you shoot long days — the camera's own base stays free rather than being taken up by the mount.
The front of the frame is cut away to give free access to the shutter button and the joystick, and there is a memory card opening on the left-hand side. The bracket does not interfere with the screen rotation.
On the back is a fixed plate carrying six magnets. They need steel — a filing cabinet, a steel railing, a fridge panel. If a fridge magnet sticks to it, the PK15 will too. A latch releases the plate so it pivots through 180°: folded flat, it holds the camera against a wall or any vertical steel surface, and swung down it becomes a foot that stands the camera on a desk or a bench.
A cold shoe on the side of the frame takes a small light or a microphone. The Allen key that tightens the hinge pivot stows in a groove on the plate, so the hinge can be firmed up whenever it needs it. The bracket is plastic with metal and silicone, 73 x 58 x 49mm and 66g. It is moulded rather than machined, making this a simple, cost-effective product.
Camera Brand & Model Compatibility:
- DJI Osmo Pocket 3
- DJI Osmo Pocket 4
Key Features:
- Clamps the Camera In: A wrap-around frame with a hinged door and a catch, lined with silicone on the back face.
- Battery Grip Still Fits: The base of the frame is open, so the DJI battery grip attaches with the bracket in place.
- Six Magnets: Holds on a filing cabinet, a steel railing, a fridge panel or any other steel surface.
- 180° Plate — Wall or Desk: A latch releases the back plate. Flat against a wall, or swung down as a desk foot.
- Shutter, Joystick and Card Reachable: Openings in the front for the two controls and on the left for the memory card.
- Cold Shoe and a Stowed Allen Key: Takes a small light or microphone, and the key for tightening the hinge lives in a groove on the plate.
Specifications:
- Camera Holder: Wrap-around frame with a hinged door and catch
- Padding: Silicone, on the inside of the back face
- Magnets: 6, in the back plate
- Magnet Surface: Steel and other ferrous metal only
- Back Plate: Fixed to the frame, latch released, pivots through 180°
- Hinge: Damping adjustable with the supplied Allen key, which stows in a groove on the plate
- Accessory Mount: 1 x cold shoe, on the side of the frame
- Camera Access: Shutter button and joystick through the front, memory card on the left, base open for the battery grip
- Material: Plastic, metal, silicone and magnets
- Dimensions: 73 x 58 x 49mm
- Weight: 66g
- Water Resistance: Not water resistant
What's Included?
- 1 x ULANZI PK15 Magnetic Holder Bracket
- 1 x Allen Wrench
What is Not Included? Cameras, battery grips, lights, microphones and other accessories not listed may be shown in images for demonstration purposes ONLY and are NOT included.
Buy with Confidence: Hero Gear is an Authorised Reseller for all brands we stock in Australia. Standard Postage Australia-Wide is already included in the price of every item. Items are covered by a 12-month Australian Warranty and are shipped directly from our Hunter Valley, NSW, warehouse.
⚠️ Important Care & Warranty Exclusions
- Steel, NOT All Metal: The magnets hold on steel and other ferrous metal. They will NOT hold on aluminium, plastic, glass or wood — and plenty of gym frames, camping racks, ladders and car panels are aluminium. Test the surface first before letting go.
- Mounts by Magnet, or Stands on its Own Plate: There is NO 1/4"-20 thread anywhere on this bracket. It holds on steel, or the plate folds down and it stands on a surface. It will NOT fit a tripod, a pole or a clamp.
- DJI Osmo Pocket3 and Pocket4 Only: The original Osmo Pocket and the Pocket2 have a different body and will NOT fit the frame.
- No Rated Load: No holding weight is published for the magnets. They are sized for the camera and this bracket, so do NOT hang anything heavier off them, and think twice before trusting them above a hard floor or inside a moving vehicle.
- Latch It and Check It: Close the door until the catch engages, and check the camera is held before you take your hands away, every time.
- Tighten the Hinge if it Starts to Sag: The supplied Allen key tightens the pivot on the back plate. If the plate will no longer hold its angle under the weight of the camera, firm it up rather than forcing it.
- Use at your own risk: Hero Gear is not responsible for loss or damage to cameras or equipment used in conjunction with this accessory.
- Warranty Coverage: Warranty covers manufacturing defects only. Damage resulting from use, misuse, accidents, falls, or any activity-related incident is NOT covered — regardless of the activity involved.
Need More Information?
For further details on how we get your order to you, or how we handle support, please visit our dedicated information pages:
- View our Shipping Policy
- View our Warranty Information
- View our Returns Policy
Have a specific question about this product? We are here to help! Please reach out to us via our Contact Us page.
Technical Compatibility and Specifications
Compatible Model: DJI Osmo Pocket3
Compatible Model: DJI Osmo Pocket4
Compatible Model: DJI Osmo Pocket4 Pro
Compatible Brand: DJI
Type: Mount: Magnetic Holder Bracket
Manufacturer SKU: PK15
Warranty
We are authorised Australian resellers, ensuring you receive genuine stock and local support. All products purchased from Hero Gear come with a standard 12-Month Australian Warranty.
