Express Post available for urgent orders.
ULANZI PK16 Folding Magnetic Mount & Stand for DJI Osmo Pocket3/4
Product Description
The ULANZI PK16 Folding Magnetic Mount & Stand (Model: PK16) answers the question every Osmo Pocket owner runs into eventually — how do you put it down? The camera clips into the cradle and locks, and from there the mount gives you four mounting ports and a six-magnet face, so the Pocket can go on a railing, a tripod, a backpack strap or a desk without you holding it.
Mounting is tool-free. Press both sides of the clip, line it up with the base of the camera and press gently until it locks. A cable pass-through slot runs through the cradle, so the USB-C port stays reachable, and the Pocket can charge or run on mains power while it is mounted. The screen still rotates, the joystick and shutter are clear, and nothing is covered.
The upright plate carries six N52 magnets and tilts through 55°. Its face is a ribbed silicone pad that the back of the camera braces against, so the Pocket is supported along its body rather than hanging off the cradle alone. The magnets need steel — a filing cabinet, a steel railing, a fridge panel. If a fridge magnet sticks to it, the PK16 will too. The back of the upright plate sports a 1/4" thread hole with two ARRI locating holes for mounting to a variety of 1/4" accessories such as grips and poles.
The lower arm swings through 270° and carries three of the four ports: a folding GoPro-style finger mount that connects to any GoPro-style 3-Prong accessory with a thumbscrew (not included), such as a backpack strap mount, a pole or a clamp. There's also a 1/4"-20 thread with two ARRI locating holes, and a DJI magnetic quick-release location. Folded flat, that quick-release face points underneath and the whole mount clips instantly onto a DJI magnetic grip, strap or backpack mount. Folded out, the same face takes an accessory built for the DJI Action camera base — a compact LED fill light, for instance — and the Pocket's gimbal swivels round to match wherever the light is pointing.
Opened out into an L shape, it stands on a desk with the Pocket upright. The whole thing is CNC-machined aluminium alloy and weighs 60g. Both arms fold back into a flat Z against the body for compact storage.
The Four Mounting Ports:
| Port: | Where It Is and What It Takes |
| 1/4"-20 thread (front) | On the back of the upright plate, with two ARRI locating holes. Tripods, mini tripods, light stands, grips and poles |
| 1/4"-20 thread (rear) | On the lower arm, with two ARRI locating holes. A second threaded point, at a different angle to the one on the plate |
| Folding finger mount | On the lower arm. Goes into any GoPro-style 3-Prong accessory — backpack strap mount, chest harness, pole or clamp. Needs a thumbscrew, not included |
| Magnetic quick-release | On the lower arm. Folded flat it clips onto a DJI magnetic mount; folded out, it carries an accessory built for the DJI Action camera base |
Camera Brand & Model Compatibility:
- DJI Osmo Pocket 3
- DJI Osmo Pocket 4
Key Features:
- Clips On and Locks: The Pocket presses into the cradle and locks, with a cable pass-through so it can charge or run on power while mounted.
- Six N52 Magnets: Holds the camera on a steel railing, cabinet or fridge panel, with a ribbed silicone pad bracing the back of the camera.
- Four Mounting Ports: Two 1/4"-20 threads with ARRI locating holes, a folding finger mount and a DJI magnetic quick-release location.
- 270° and 55°: The lower arm swings through 270°, and the magnetic plate tilts through 55°, both on friction hinges that stay where you set them.
- Stands on a Desk: Opened into an L, it holds the Pocket upright on a bench or desk, and folds into a flat Z for storage.
- 60g of CNC Aluminium: Machined aluminium alloy throughout, light enough to leave on the camera between shots.
Specifications:
- Camera Mount: Magnetic latch cradle with a cable pass-through slot
- Magnets: 6 x N52
- Magnet Surface: Steel and other ferrous metal only
- Angle Adjustment: 270° arm rotation, 55° plate tilt
- Threaded Mounts: 2 x 1/4"-20, each with two ARRI locating holes
- Finger Mount: Folding GoPro-style, on the lower arm. Thumbscrew not included
- Quick Release: DJI magnetic quick-release location, on the lower arm
- Camera Support: Ribbed silicone pad on the magnetic plate
- Folding: Both arms fold flat into a Z. The camera is removed first
- Material: CNC-machined aluminium alloy and plastic
- Dimensions: 56 x 43.5 x 36.5mm
- Weight: 60g
What's Included?
- 1 x ULANZI PK16 Folding Magnetic Mount & Stand
What is Not Included? Cameras, tripods, lights, grips, thumbscrews and other accessories not listed may be shown in images for demonstration purposes ONLY and are NOT included.
Buy with Confidence: Hero Gear is an Authorised Reseller for all brands we stock in Australia. Standard Postage Australia-Wide is already included in the price of every item. Items are covered by a 12-month Australian Warranty and are shipped directly from our Hunter Valley, NSW, warehouse.
⚠️ Important Care & Warranty Exclusions
- Steel, NOT All Metal: The magnets hold on steel and other ferrous metal. They will NOT hold on aluminium, plastic, glass or wood — and plenty of gym frames, camping racks, ladders and car panels are aluminium. Test the surface first before letting go.
- DJI Osmo Pocket3 and Pocket4 Only: The original Osmo Pocket and the Pocket2 have a different body and will NOT fit the cradle.
- The Quick-Release Face Does One Job at a Time: Mount a light on it and that face is no longer your mounting point — attach the mount by the magnets or a 1/4" thread instead.
- No Rated Load: No holding weight is published for the magnets. They are sized for the camera and this mount, so do NOT hang anything heavier off them, and think twice before trusting them above a hard floor or inside a moving vehicle.
- Check It Is Locked: Press both sides of the clip, line it up with the camera base and press until it locks. Check the camera is held before you take your hands away, every time.
- Use at your own risk: Hero Gear is not responsible for loss or damage to cameras or equipment used in conjunction with this accessory.
- Warranty Coverage: Warranty covers manufacturing defects only. Damage resulting from use, misuse, accidents, falls, or any activity-related incident is NOT covered — regardless of the activity involved.
Need More Information?
For further details on how we get your order to you, or how we handle support, please visit our dedicated information pages:
- View our Shipping Policy
- View our Warranty Information
- View our Returns Policy
Have a specific question about this product? We are here to help! Please reach out to us via our Contact Us page.
Technical Compatibility and Specifications
Compatible Model: DJI Osmo Pocket3
Compatible Model: DJI Osmo Pocket4
Compatible Brand: DJI
Type: Mount: Magnetic Mount/Stand
Manufacturer SKU: PK-16
Warranty
We are authorised Australian resellers, ensuring you receive genuine stock and local support. All products purchased from Hero Gear come with a standard 12-Month Australian Warranty.
